Step 2 of 7
29%

Laying Out The Shape

Print out the spatula template below (PDF) at 100% or ‘Actual Size’. Cut it out and carefully trace around it onto your blank.

Mark the center of the circle through the template. Any pointed metal object will work, but a square awl allows you to ream out the start of the hole. This helps to center the auger bit when boring the hole in the next step.

A4

US Letter
Place the template onto your blank, flushing the end with one corner of your blank
Place the template onto your blank, flushing the end with one corner of your blank
Trace around the template with a sharp, pointed pencil
Trace around the template with a sharp, pointed pencil
Mark the very centre of the hole through the template using a square awl
Mark the very centre of the hole through the template using a square awl
Step 2 of 7
Next Step